Our Services
Explore Our Range of Marine Safety Services
Availability of spares is critical and vital on-board vessels. We have direct access to all the spares your fire protections systems and appliances on board your vessels may require. We keep stock of a full range of spares , respond rapidly to enquiries and supply spare parts for our own equipment and other 3rd party packages. We assure maximum safety and productivity optimisation for our clients. We support our clients’ through the entire life cycles of their vessels. We provide safe, sustainable and cost effective continuity of operations.
Fixed Fire Fighting and Fire Suppression System
CO2 high / low pressure systems
Deck foam and helideck foam systems
Dry chemical powder system
Inergen system
Novec 1230 system
FM200 system& Halon System
Dual agent system
High / low pressure water mist and water sprinkler system
Galley wet chemical system for deep fat cooking equipment
Fixed Fire & Smoke Alarm Detection System
LAFF system
AC/OX gas distribution system
Fire Extinguishers
Life Saving Apparatus (LSA)
Self-Contained Breathing Apparatus (SCBA)
Emergency Escape Breathing Device Apparatus (EEBD)
Emergency Medical Oxygen Resuscitator Sets and Cylinders
Immersion Suits
Inflatable Lifejackets
Fireman Protection Suits
Anti-Exposure Chemical Protection Suits
Calibration
Fixed gas sampling system
Fixed gas detection system
Fire detection system
Cargo hold smoke detection system
15ppm bilge alarm monitor (OWS)
Oil discharge monitoring system (ODME)
O2 analyzer for IG system (IGS)
Vapour emission control system (VECS O2 system)
Pressure and Temperature Transmitters
UTI/MMC meter
Multi gas detector
Gas sampling pump
Pressure gauge
Pressure calibrator with handpump
Temperature calibrator
Thermometer
RTD
Thermocouple
4-20mA loop calibrator
Personal Breath Alcohol Tester
Aneroid Barometer
Torque Wrench
Periodic Control Tests and Analysis
BA Compressor Air Quality Test
Potable/Ballast/Scrubber/Sewage Water Analysis
Periodic Control Tests of Fire Extinguishing Foam Concentrates
Produced Foam Test
Periodic Moisture Content Test of Dry Chemical Powder Fire Extinguishing Agent
Load Testing Services
We use water bolsters, water bags, and calibrated load cells for our load testing work. Our trained and qualified engineers carry out load testing in accordance to ROs and equipment manufacturers’ requirements. Water bags are utilized for applications in which a suspended load is preferred or required. We offer an inventory of water bags and load cells up to test loads of 50 ton capacity and lifeboat davit testing up to 20 ton.
Water bags offer safe working conditions and are economical to use. Weighing approximately 2% of their rated capacity, transportation cost is greatly minimized as compared to conventional weights. Its light weight allows ease of handling and control, resulting in minimum downtime for the equipment being tested. As such, we are able to carry out similar load testing of cargo gears and gangway ladders as a complete package for our valued clients.
Load Testing Services: Cranes
Deck Crane
Gantry Crane
Provision Crane
Bunker Davits/Hose handling Crane
Engine Room Overhead Crane
Load Testing Services: Others
Workshop Davit Arms
Trolley Beams
A Frames
Gangway/Accommodation Ladders
Personal Transfer Baskets or PTB
Drinking Water, Sewage Water, Bilge Water, Gray Water, Exhaust Gas Scrubber Wash Water & Ballast Water Testing
The Maritime Labour Convention (MLC 2006) have set out regulations specifying the need to comply and to maintain high quality drinking water standards onboard ship which protect crew from waterborne health risks.
Drinking water requirement is also addressed in the World Health Organization (WHO) International Health Regulations Guide to Ship Sanitation (2007) and WHO Guidelines for Drinking Water Quality (2011). The IMO Resolution MEPC.159 (55), 2006 revised guidelines on implementation of effluent standards and performance tests for sewage treatment plants require ship owners to ensure the efficiency of their onboard sewage treatment system and exhaust system at all times.
The EPA’s 2013 Vessel General Permit (VGP) requires vessel discharge, sample collection and analytical monitoring for Bilge water, Gray water, Exhaust Gas Scrubber Wash water and Ballast water. The IMO Ballast Water Management Convention seeks to address the issue of invasion of aquatic organism to other aquatic ecosystem. The guidelines requires the integrity testing of the ballast water treatment system to ensure its efficiency and reliability.